Researchers, practitioners, instructors, and students all welcomed the first edition of Heat Exchangers: Selection, Rating, and Thermal Design for gathering into one place the essence of the information they need-information formerly scattered throughout the literature. While retaining the basic objectives and popular features of the bestselling first edition, the second edition incorporates significant improvements and modifications. New in the Second Edition: 
<li>Introductory material on heat transfer enhancement 
</li>
<li>An application of the Bell-Delaware method 
</li>
<li>New correlation for calculating heat transfer and friction coefficients for chevron-type plates 
</li>
<li>Revision of many of the solved examples and the addition of several new ones The authors take a systematic approach to the subject of heat exchanger design, focusing on the fundamentals, selection, thermohydraulic design, design processes, and the rating and operational challenges of heat exchangers. It introduces thermal design by describing various types of single-phase and two-phase flow heat exchangers and their applications and demonstrates thermal design and rating processes through worked examples, exercises, and student design projects. Much of the text is devoted to describing and exemplifying double-pipe, shell-and-tube, compact, gasketed-plate heat exchanger types, condensers, and evaporators.</li>

Heat Exchangers: Selection, Rating, and Thermal Design, Second Edition

Science & Math

Liu, Hongtan

Pramuanjaroenkij, Anchasa

Kakaç, Sadık

Chemistry

CRC-Press

Heat Exchangers: Selection, Rating, and Thermal Design takes a systematic approach to the subject, focusing on the selection, design, rating, and operational challenges of various types of heat exchangers. Written by well-known authors in the field of heat transfer and thermal design, this book covers all the most commonly used types of heat exchangers, including condensers and evaporators. The text begins with the classification of the different types of heat exchangers and discusses methods for their sizing and rating. Single phase forced convection correlations in ducts, two-phase flow heat transfer correlations for thermal design, and pressure drop and pumping power analysis are also covered. A chapter is devoted to the special problem of fouling. Thermal design methods and processes, including designs for condensers and evaporators, complete this thorough introduction to the subject. The appendix provides information on the thermophysical properties of fluids, including the new refrigerants. Every topic features worked examples to illustrate the methods and procedures presented, and additional problems are included at the end of each chapter, with examples to be used as a student design project. An instructor's manual is available with complete solutions to selected problems Heat Exchangers: Selection, Rating, and Thermal Design - No engineer or engineering student involved in the design or operation of heat exchange equipment can afford to be without it.

Heat Exchangers: Selection, Rating, and Thermal Design

Heat exchangers are essential in a wide range of engineering applications, including power plants, automobiles, airplanes, process and chemical industries, and heating, air-conditioning, and refrigeration systems. Revised and fully updated with new problem sets, Heat Exchangers: Selection, Rating, and Thermal Design, Fourth Edition presents a systematic treatment of heat exchangers, focusing on selection, thermal-hydraulic design, and rating. Topics discussed include <ul>
<li>Classification of heat exchangers</li> <li>Basic design methods of heat exchangers for sizing and rating problems</li> <li>Single-phase forced convection correlations for heat exchangers</li> <li>Pressure drop and pumping powerfor heat exchangersand piping circuits</li> <li>Design methods of heat exchangers subject to fouling </li> <li>Thermal design methods and processes for double-pipe, shell-and-tube, gasketed-plate, compact, and polymer heat exchangers</li> <li>Two-phase convection correlations for heat exchangers</li> <li>Thermal design of condensers and evaporators</li> <li>Micro/nanoheat transfer</li> </ul> The Fourth Edition contains updated information about microscale heat exchangers and the enhancement heat transfer for applications to heat exchanger design and experiment with nanofluids. The Fourth Edition is designed for courses/modules in process heat transfer, thermal systems design, and heat exchanger technology. This text includes full coverage of all widely used heat exchanger types. A complete solutions manual and figure slides of the text’s illustrations are available for qualified adopting instructors.

Heat Exchangers: Selection, Rating, and Thermal Design, Fourth Edition

Heat exchangers are essential in a wide range of engineering applications, including power plants, automobiles, airplanes, process and chemical industries, and heating, air conditioning and refrigeration systems. Revised and updated with new problem sets and examples, Heat Exchangers: Selection, Rating, and Thermal Design, Third Edition presents a systematic treatment of the various types of heat exchangers, focusing on selection, thermal-hydraulic design, and rating. Topics discussed include: <ul>
<li>Classification of heat exchangers according to different criteria</li> <li>Basic design methods for sizing and rating of heat exchangers</li> <li>Single-phase forced convection correlations in channels</li> <li>Pressure drop and pumping power for heat exchangers and their piping circuit</li> <li>Design solutions for heat exchangers subject to fouling</li> <li>Double-pipe heat exchanger design methods</li> <li>Correlations for the design of two-phase flow heat exchangers</li> <li>Thermal design methods and processes for shell-and-tube, compact, and gasketed-plate heat exchangers</li> <li>Thermal design of condensers and evaporators</li> </ul> This third edition contains two new chapters. Micro/Nano Heat Transfer explores the thermal design fundamentals for microscale heat exchangers and the enhancement heat transfer for applications to heat exchanger design with nanofluids. It also examines single-phase forced convection correlations as well as flow friction factors for microchannel flows for heat transfer and pumping power calculations. Polymer Heat Exchangers introduces an alternative design option for applications hindered by the operating limitations of metallic heat exchangers. The appendices provide the thermophysical properties of various fluids. Each chapter contains examples illustrating thermal design methods and procedures and relevant nomenclature. End-of-chapter problems enable students to test their assimilation of the material.

Heat Exchangers: Selection, Rating, and Thermal Design, Third Edition

See the best price to sell, buy, or rent books by Liu, Hongtan. BookScouter helps to compare book prices from 25+ online bookstores and 30+ buyback vendors with a single search.

Books by Liu, Hongtan

See the best price to sell, buy, or rent books by Liu, Hongtan. BookScouter helps to compare book prices from 25+ online bookstores and 30+ buyback vendors with a single search.

Heat Exchangers: Selection, Rating, and Thermal Design, Second Edition

Heat Exchangers: Selection, Rating, and Thermal Design

Heat Exchangers: Selection, Rating, and Thermal Design, Fourth Edition

Heat Exchangers: Selection, Rating, and Thermal Design, Third Edition