Configuration Management Metrics: Product Lifecycle and Engineering Documentation Control Process Measurement and Improvement provides a comprehensive discussion of measurements for configuration management/product lifecycle processes. Each chapter outlines one of the most important measures of merit – the need for written policy and procedures. The best of the best practices as to the optimum standards are listed with an opportunity for the reader to check off those that their company has and those they do not. The book first defines the concept of configuration management (CM) and explains its importance. It then discusses the important metrics in the major CM and related processes. These include: new item release; order entry/fulfillment; request for change; bill of material change cost; and field change. Ancillary processes which may or may not be thought of as part of these major processes are also addressed, including deviations, service parts, publications and field failure reporting.

Configuration Management Metrics

Business & Money

Watts, Frank B.

Economics

William Andrew

This new Handbook provides a series of reference guides to cleaner production methods, technologies, and practices for key industry sectors. Each volume covers, for each industry sector: * the manufacturing technologies * waste management * pollution * methods for estimating and reporting emissions * treatment and control technologies * worker and community health risk exposures * cost data for pollution management * cleaner production and prevention alternatives Best Practices in the Wood and Paper Industries provides an overview of the forestry, wood preserving, pulp and paper industries and identifies the key environmental aspects, supported by case studies of major incidents. It provides general explanations of the major unit operations and processes in pulp and paper mills and wood treating plants, covering new trends alongside traditional methods. The environmental issues regarding air, water and solid waste are all addressed, identifying all US plants and their TRI data, and the authors provide calculation methods for properly accounting for air emissions and P2 practices to reduce them.Provides guidelines on cleaner production and pollution prevention practices for improving overall environmental performanceDiscusses emerging technologies and processes for cleaner airContains an Inventory of Chemical Toxicity Properties

Handbook of Pollution Prevention and Cleaner Production Vol. 2: Best Practices in the Wood and Paper Industries

Science & Math

Cheremisinoff Consulting Engineer, Nicholas P.

Rosenfeld, Paul E.

Earth Sciences

This book provides an overview of the rapidly growing and developing field of nanotechnology, focusing on key essentials, and structured around a robust anatomy of the subject. The newcomer to nanotechnology, who may well have a strong background in one of the traditional disciplines such as physics, mechanical or electrical engineering, chemistry or biology, or who may have been working in microelectromechanical systems (MEMS) technology, is confronted with a bewildering range of information. This book brings together the principles, theory and practice of nanotechnology, giving a broad yet authoritative introduction to the possibilities and limitations of this exciting field.Succinct chapter summaries allow readers to grasp quickly the concepts discussed and gain an overview of the fieldDiscusses design and manufacture, and applications and their impact in a wide range of nanotechnology areasAn ideal introduction for businesses and potenti

Nanotechnology: An Introduction (Micro and Nano Technologies)

Ramsden, Jeremy

Part of a series of core databooks within the William Andrew Plastics Design Library, Fatigue and Tribological Properties of Plastics and Elastomers provides a comprehensive collection of graphical multipoint data and tabular data covering fatigue and tribology. The concept of fatigue is very straightforward: if an object is subjected to a stress or deformation, and it is repeated, the object becomes weaker. This weakening of plastic material is called fatigue. Tribology is the science and technology of surfaces in contact with each other and therefore covers friction, lubrication and wear. The reduction of wear and fatigue and the improvement of lubrication are key bottom-line issues for engineers and scientists involved in the plastics industry and product design with plastics. Fatigue and Tribological Properties of Plastics and Elastomers, 2e, is an update of all that has changed in the world of plastics since the 1st edition appeared nearly 15 years ago, and has been reorganized from a polymer chemistry point of view.

Fatigue and Tribological Properties of Plastics and Elastomers (Plastics Design Library)

Engineering & Transportation

McKeen, Laurence W.

Engineering

Fundamental Principles of Engineering Nanometrology provides a comprehensive overview of engineering metrology and how it relates to micro and nanotechnology (MNT) research and manufacturing. By combining established knowledge with the latest advances from the field, it presents a comprehensive single volume that can be used for professional reference and academic study.

Fundamental Principles of Engineering Nanometrology (Micro and Nano Technologies)

Richard Leach

Quality Management in Plastics Processing provides a structured approach to the techniques of quality management, also covering topics of relevance to plastics processors. The book’s focus isn’t just on implementation of formal quality systems, such as ISO 9001, but about real world, practical guidance in establishing good quality management. Ultimately, improved quality management delivers better products, higher customer satisfaction, increased sales, and reduced operation costs.  The book helps practitioners who are wondering how to begin implementing quality management techniques in their business focus on key management and technical issues, including raw materials, processing, and operations. It is a roadmap for all company operations, from people, product design, sales/marketing, and production – all of which are impacted by, and involved in, the implementation of an effective quality management system.  Readers in the plastics processing industry will find this comprehensive book to be a valuable resource.Helps readers deliver better products, higher customer satisfaction, and increased profits with easily applicable guidance for the plastics industryProvides engineers and technical personnel with the tools they need to start a process of continuous improvement in their companyPresents practical guidance to help plastics processing companies organize, stimulate, and complete effective quality improvement projects

Quality Management in Plastics Processing

Kent, Robin

The use of plastics in agriculture – to increase crop output, improve food quality and improve sustainability – has grown substantially in both quantity and the range of applications. Many of the early researchers that conducted field research in the use of plastics in agriculture have either retired or are deceased. These early pioneers in plasticulture research, the basis of plant production using plastics, were very creative and persistent in discovering uses of plastics in agricultural applications. A Guide to the Manufacture, Performance, and Potential of Plastics in Agriculture contains both references not only to their accomplishments but also their publications. The book discusses plasticulture-the basis of plant production using plastics – including topics such as plastic mulch, row covers, drip irrigation, and high/low tunnels. It covers the process of producing polyethylene and polypropylene plastics that are used in plant and animal production agriculture, and the many uses of plastics in all aspects of agriculture, including plastic greenhouses, rigid mold plastics, disposal of plastics, and plastics in animal production. This book introduces a range of academics and industrial practitioners to the impact of plastics in agriculture, both historically and in a range of current applications. It also provides new perspectives on future developments to enable further research and application. It is an invaluable reference on the use of polyethylene, polypropylene films, and such products in all aspects of agricultural production.

A Guide to the Manufacture, Performance, and Potential of Plastics in Agriculture (Plastics Design Library)

Michael Orzolek

Applications of Nanofluid for Heat Transfer Enhancement explores recent progress in computational fluid dynamic and nonlinear science and its applications to nanofluid flow and heat transfer. The opening chapters explain governing equations and then move on to discussions of free and forced convection heat transfers of nanofluids.  Next, the effect of nanofluid in the presence of an electric field, magnetic field, and thermal radiation are investigated, with final sections devoted to nanofluid flow in porous media and application of nanofluid for solidification. The models discussed in the book have applications in various fields, including mathematics, physics, information science, biology, medicine, engineering, nanotechnology, and materials science.Presents the latest information on nanofluid free and force convection heat transfer, of nanofluid in the presence of thermal radiation, and nanofluid in the presence of an electric fieldProvides an understanding of the fundamentals in new numerical and analytical methodsIncludes codes for each modeling method discussed, along with advice on how to best apply them

Applications of Nanofluid for Heat Transfer Enhancement (Micro and Nano Technologies)

Ganji, Davood Domairry

Sheikholeslami, Mohsen

Chemistry

Thermoplastics and Thermoplastic Composites, Third Edition bridges the technology and business aspects of thermoplastics, providing a guide designed to help engineers working in real-world industrial settings. The author explores the criteria for material selection, provides a detailed guide to each family of thermoplastics, and explains the various processing options for each material type. More than 30 families of thermoplastics are described with information on their advantages and drawbacks, special grades, prices, transformation processes, applications, thermal behavior, technological properties (tenacity, friction, dimensional stability), durability (ageing, creep, fatigue), chemical and fire behavior, electrical properties, and joining possibilities.  In this third edition, standards and costs have been updated for all materials, and more information on topics such as bioplastics, 3D printing and recycling have been added. In addition, an entirely new chapter on the concept of ‘Industry 4.0’ has been added, with guidance and suggestions on the incorporation of virtualization, connectivity, and automation into the plastics engineering process to reduce materials and processing failure. Includes detailed case studies that illustrate best practices across a wide range of applications and industry sectorsPresents a new chapter on the ‘Industry 4.0’ conceptSuggests software solutions to assist with design, decision-making and management, along with other forms of automation

Thermoplastics and Thermoplastic Composites (Plastics Design Library)

Biron, Michel

Quartz, zeolites, gemstones, perovskite type oxides, ferrite, carbon allotropes, complex coordinated compounds and many more -- all products now being produced using hydrothermal technology. Handbook of Hydrothermal Technology brings together the latest techniques in this rapidly advancing field in one exceptionally useful, long-needed volume. The handbook provides a single source for understanding how aqueous solvents or mineralizers work under temperature and pressure to dissolve and recrystallize normally insoluble materials, and decompose or recycle any waste material. The result, as the authors show in the book, is technologically the most efficient method in crystal growth, materials processing, and waste treatment. The book gives scientists and technologists an overview of the entire subject including: À Evolution of the technology from geology to widespread industrial use. À Descriptions of equipment used in the process and how it works. À Problems involved with the growth of crystals, processing of technological materials, environmental and safety issues. À Analysis of the direction of today's technology. In addition, readers get a close look at the hydrothermal synthesis of zeolites, fluorides, sulfides, tungstates, and molybdates, as well as native elements and simple oxides. Delving into the commercial production of various types, the authors clarify the effects of temperature, pressure, solvents, and various other chemical components on the hydrothermal processes.

Handbook of Hydrothermal Technology

Byrappa, K.

Yoshimura, Masahiro

See the best price to sell, buy or rent books by the William Andrew publisher. BookScouter helps to compare book prices from 25+ online bookstores and 30+ buyback vendors with a single search.

Books by William Andrew